3D Printer, with 10m PLA Filament, Mini Printer with Mobile Printing Platform, High-Precision Printing, Mini Desktop 3D Printing 12 x 12 x 12cm, Low-Noise Design


Price: $109.99
(as of Oct 27,2022 16:54:13 UTC – Details)



Nozzle Diameter: 0.4mm
Extruder Temperature: 180-250℃
Melt-down Temperature PLA: 180℃
Recommended  Print Speed: 30~40MM/S
The maximum printing speed: 60MM/S
Compatible Systems: Windows, Mac
Layer Thickness: 0.05~0.3mm
File Format: STL, G-code
Connection Type: TF card, USB
Power Input: 100~240V AC, 50/60Hz
Slicer Support: Easyware, CURA, S3D
Working Temperature 5℃~35℃/ 40°F~95°F
Maximum Power: 36W
Working Humidity: 30%~90%

Problems with silk not coming out in the middle of printing
1. Filled graphics
Generally speaking, if this problem occurs, you can first change the fill pattern to see if it solves the problem. Common strong fill graphics: grid, honeycomb, triangle weak fill: line fill. Fast honeycomb
2. Print speed is too fast
Generally, the speed of filling is set faster than the speed of printing, so if this problem occurs, you can try to reduce the printing speed by 50%.
3. Insufficient filling and extrusion
Some slicing software can be set individually to fill the extrusion amount, you can try to fill the extrusion amount to increase.

Nozzle blockage problem, not spitting out material
1. Unlock the extruder stepper motor and push the consumables manually.
2. If the above does not solve the problem, exit the consumables, cut off the deformed consumables, and push the consumables again.
3. You can also use an unblocking tool that corresponds to the diameter of the nozzle to unblock (e.g. a drill, acupuncture needle, guitar string, etc.)
4. If the above are not resolved, you can replace a new nozzle.

Leave a Reply